U.S.Robotics SureConnect 9106 Manual Del Usuario página 15

The ADSL light is flashing or is not illuminated.
Possible Solution: Review the Troubleshooting Checklist at the beginning
of this section.
I can't access the Internet.
Possible Solution:
• Review the Troubleshooting Checklist at the beginning of this section.
• Make sure that you have an active ISP account.
• Check your VCI/VPI settings, user name, password, and authentication
type via EasyConfigurator. To check these variables, access
EasyConfigurator and select the Status tab. In addition, the user name
and password may be case sensitive. Be sure to check that the CAPS
LOCK key is off.
• Contact your ISP for further assistance.
I don't know if my assigned IP Address is Static or Dynamic.
Possible Solution: If you have active DSL service, you probably have a
Dynamic IP address. Check with your ISP to verify this information. Some
ISPs assign Static IP addresses.
I am no longer able to access the Internet.
Possible Solution: You need to verify the connection setting of your Web
browser and that the HTTP Proxy feature of your Web browser is disabled.
You need to do this so that your Web browser can read the configuration
pages. Launch your Web browser.
Internet Explorer users: Click Tools, Internet Options, and then the
Connections tab. Select Never dial a connection, click Apply, and then click
OK. Click Tools again, then click Internet Options. Click the Connections
tab, and click LAN Settings. Clear all the check boxes and click OK. Click OK
to close Internet Options.
Netscape Navigator users: Click Edit, Preferences, and then double-click
Advanced in the Category window. Click Proxies, select Direct connection
to the Internet, and then click OK. Click Edit again, then click Preferences.
Under Category, double-click Advanced, then click Proxies. Select Direct
connection to the Internet and click OK.
13
13