Preparing The Appliance - Silvercrest SSVS 1000 A1 Instrucciones De Uso

Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composites
NOTE
► If possible, keep the appliance's original packaging during the warranty
period so that the appliance can be packed properly for return shipment in
the event of a warranty claim.

Preparing the appliance

Wash the appliance in warm soapy water and dry it thoroughly before first
use.
Place the appliance into a pot that has side walls with a height of approx.
15 cm. Fasten the appliance on the pot's sidewall by means of the pot clip
Set the pot onto a level, dry and slip-free surface.
Pour warm water into the pot until the water level is between the MIN and
MAX markings.
CAUTION – PROPERTY DAMAGE!
► Note that the water level rises when you add the food. Do not exceed the
MAX marking and ensure that the water level is always above the MIN
marking!
NOTE
► The water temperature should be as close as possible to the temperature
you require for cooking. This minimises the waiting time until the set tem-
perature is reached.
► The water should not be hotter than the required temperature, however.
► You can find the required temperatures in the list of cooking times (see sec-
tion Cooking times).
CAUTION – PROPERTY DAMAGE!
► Before connecting the appliance, compare the connection data of the
appliance (voltage and frequency) on the rating plate with that of your
electrical supply. This data must correspond in order to prevent damage to
the appliance.
Plug the mains cable
briefly and the button symbol
will light up red. The appliance is now ready for use.
■ 26
│ GB│IE
into a power socket. The display
as well as the button symbol
.
will light up
/
SSVS 1000 A1