Operating Instructions; Preparing The Nebulizer For Use - Omron CompAir Elite NE-C30 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating Instructions

WARNING
Clean and disinfect the nebulizer kit, mouthpiece, and optional
nosepiece or masks before using them for the first time after purchase.
WARNING
If the device has not been used for a long period of time, clean and
disinfect the nebulizer kit, mouthpiece, and optional nosepiece or
masks before using them.
For directions on cleaning and disinfecting refer to page 17 and page 18.
CAUTION
Make sure the air filter is clean.
on average for more than 60 days, replace it with a new one.
For directions on changing the air filter refer
to page 20.
1. Insert the power plug on the AC adapter into
the power connector on the back side of the
compressor. Plug the AC adapter into the
electrical outlet.
WARNING
Do not plug or unplug the power cord into the
electrical outlet with wet hands.
CAUTION
Do not overload power outlets. Plug the device into the
appropriate voltage outlet.
CAUTION
Do not use extension cords. Plug the power cord directly
into the electrical outlet.
2. Lift up the mouthpiece and the cap to remove
them from the nebulizer kit.
3. Rotate the inhalation top counterclockwise (A) and lift
(B) to remove the inhalation top from the medication cup.

PREPARING THE NEBULIZER FOR USE

If the air filter has changed color or has been used
10
Power Plug
Power Connector
Power Outlet

Publicidad

Tabla de contenido
loading

Tabla de contenido