Display Functions; Time Setting - Astralpool PROHEAT II Serie Manual De Instrucciones

PROHEAT II SERIES · HEAT PUMP AIR/WATER SYSTEM
6.8.

DISPLAY functions

1. Heart pump ON/OFF
Press to switch the machine ON and OFF.
2. Water temperature setpoint setting
• Press to access the water temperature setpoint for the pool.
• Change the setting by pressing
the process.
• After changing the setting, press
setting, press

3. Time setting

Press to set the time.
•
• Change the time using
or .
• After setting the time, press
4. Timer setting (ECONOMIC MODE)
• Press for at least 2 seconds to activate the SCHEDULE PROGRAMMING mode.
Press for at least 5 seconds; this will display the start and end times of the first
•
period.
• Change the start hour of the first period using the
set the start minutes of the first period, using
time of period 1, using
using or
• Repeat the process to program periods 2 and 3 (if necessary).
© FLUIDRA 2019 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT.
or . Keep these buttons pressed to speed up
again to save the change. To exit the setpoint
.
or . Press
again to exit the time setting menu.
or . Press
.
ENGLISH
to adjust the minutes, using
or keys. Press
or . Press to set the end
to set the end minutes of period 1,
to
Pag: 37