AVAILABLE SPARE PARTS
Description
- RF6 Plus nebuliser kit composed of:
nebuliser, mouthpiece with valve and nasal prong
- 2 m connection tube
- Mask Set composed of: adult mask, pediatric mask and elastic band
- Spare air filter kit (2 pcs)
SYMBOLS
EC Marking medical ref. Dir
93/42 EEC and subsequent
updates
Class II device
Attention: check the instruc-
tions for use
"OFF" for part of Equipment
"ON" for part of equipment
In compliance with: European
Standard EN 10993-1 ''Biologi-
cal Evaluation of medical de-
vices'' and European Directive
93/42/EEC "Medical Devices. "
Phthalate-free. In compliance
with: Reg. (EC) no. 1907/2006
ELECTROMAGNETIC COMPATIBILITY
This device has been designed to satisfy requirements currently required for
electromagnetic compatibility (EN 60601-1-2:2007). Electrical medical devices require
special care. During installation and use with respect to EMC requirements, it therefore
required that they be installed and/or used according to the manufacturer's specification.
Potential risk of electromagnetic interference with other devices, in particular with
other devices for analysis and treatment. Radio and mobile telecommunications
devices or portable RF (mobile phones or wireless connections) may interfere
with the operation of electrical medical devices. For further information visit
www.flaemnuova.it. Flaem reserves the right to make technical and functional changes to
the product without notice.
Device serial number
Manufacturer
Type BF applied part
Alternating current
Risk: electrocution.
Consequence: Death.
Using the device while taking a bath
or shower is prohibited
Degree of protection of the casing:
IP21.
IP21
(Protected against solid foreign objects larger
than 12mm. Protected against access with a fin-
ger; Protected against vertically dripping water).
13
Code
ACO368P
ACO225P
ACO462P
ACO164P