Auriol AFW 2 A1 Instrucciones De Uso página 53

The weather station will now attempt to connect to the outdoor
sensor . The reception symbol
ture panel 3 .
NOTE
If no outdoor temperature is displayed within around 3 minutes,
the weather station will stop the reception search . The reception
symbol goes out and
outdoor temperature panel 3 .
It is possible that no signal can be received due to the sur-
rounding buildings or because the distance is too great .
If you are unable to establish an automatic connection to the
outdoor sensor, you can do this manually:
Press and hold the –/CH button 6 until the reception
♦
signal
The weather station automatically starts to receive the DCF sig-
nal after 3 minutes irrespective of whether the outdoor sensor
reception search has been successful or not . The reception
symbol flashes on the time panel 5 .
If the DCF signal is being received correctly, the current central
European Time (CET) is displayed on the time panel 5 and the
date and weekday are displayed on the date panel 1 . In ad-
dition, the reception symbol
date panel 5 .
If the device is unable to synchronise the DCF signal, you can
also manually set the time (see section Basic settings) or you
can attempt the reception again .
♦ Press the –/CH button 6 simultaneously with the +/MEM
button 7 to try to re-establish reception . The reception
symbol
AFW 2 A1
flashes on the outdoor temperature panel 3 .
flashes on the time panel 5 .
flashes on the outdoor tempera-
and are displayed on the
is permanently displayed on the
GB │ IE │
49 ■