Functional Description; Torch Neck; Cable Assembly; Putting Into Operation - Abicor Binzel ABIROB W Manual De Instrucciones

5 Functional Description

5 Functional Description

5.1 Torch neck

5.2 Mount

5.3 Cable assembly

6 Putting into operation

EN - 10
The functioning welding torch system ABIROB
welding torch ABIROB
elements together form an operating unit which provides an arc for welding
when supplied with the appropriate consumables. The welding wire required
for welding is fed by the welding torch system ABIROB
contact tip. The contact tip transmits the welding current to the welding wire,
producing an arc between the welding wire and work-piece. The light arc and
the molten pool are protected by the inert gas (MIG) and the active gas
(MAG).
The standard torch necks of types ABIROB
 Tab. 4 Lengths of ABIROB
Special designs will be manufactured upon request depending on the
application.
The complete fastener is used to attach the cable assemblyABIROB
robot via the CAT robot mount.
The liquid-cooled cable assembly provides the welding torch with all
components required for welding such as welding current, shielding gas and
coolant.
DANGER
Risk of injury due to unexpected start-up.
For the entire duration of maintenance, servicing, dismounting and repair
work, the following instructions must be adhered to:
• Switch off the power supply.
• Close off the compressed air supply.
• Pull the mains plug.
NOTICE
• The welding torch system may only be put into operation by trained
personnel.
®
®
W and complete cable assembly ABIROB
®
®
W torch neck on page EN-6
ABIROB
W consists of the components
®
®
W all the way to the
W 300, 500:
®
W to the
®
W
W. All