Only original spare parts may be used. There is no warranty for damages and liability is
disclaimed, if non-original spare parts and accessories are used.
The repairing of the machine is allowed authorized expert companies only.
The accessories applicable with our machine are listed in our brochure.
Problem
a
Machine does not start
b
Machine rotates too slowly
c
Gearbox makes strong noise
d
Other problems
Disassembly and re-assembly.
Dismantling and assembly should only be carried out using the sectional drawing.
Disassemble the tool until only, if you are skilled and have the appropriate technical knowledge.
Then only disassemble the tool as necessary to repair as required.
Keep contaminants such as dirt and grit away from the internal parts at all times.
Always determine and correct the cause of the problem prior to re-assembly. Further wear and tool
failure can result, if the original cause is not corrected.
Spare Parts
Only original spare parts may be used. There is no warranty for damages and liability is
disclaimed, if non-original spare parts and accessories are used.
SPARE PARTS AND ACCESSORIES
Air not connected
Operating pressure too low
REPAIR INSTRUCTION
Cause
Connect and open air line
Increase operating pressure
(on the machine) to 6 bar
Contact authorized expert
-
Contact authorized expert
-
Remedy
company
company
11