Names Of Parts; Before Installing The Fridge; Installation - Proline PLC 241 Manual De Instrucciones

Dispose of your old appliance
Fridge freezers contain refrigerant and gases in the insulation.
Refrigerant and blowing gases must be disposed of professionally. Ensure that tubing of the refrigerant
circuit is not damaged prior to proper disposal.

NAMES OF PARTS

BEFORE INSTALLING THE FRIDGE

Before connecting your fridge freezer to the power supply, check that the voltage stated on the rating
label of your appliance corresponds to the voltage in your home. A different voltage could damage the
appliance.
The plug is the only way to unplug the appliance and should therefore be accessible at all times. To turn
off main power to the appliance, turn it off and then detach the plug from the outlet.
The appliance must be grounded. The manufacturer is not responsible for damages that may occur as a
result of usage without grounding.

INSTALLATION

Install the appliance in a dry, well ventilated room. The installation location should neither be exposed to
direct sunlight nor near a heat source, e.g. a cooker, radiator, etc.
To ensure adequate ventilation for the appliance, allow a minimum of 10 cm of airspace on each side of
1. Temperature control knob
2. Fridge shelves
3. Drain port
4. Vegetable container cover
5. Vegetable container
6. Fridge door shelves
7. Fridge door bottle shelf
8. Freezer drawers
9. Levelling feet
6