Operating Noises; Cleaning And Maintenance; Troubleshooting; Specifications - Proline PLC 241 Manual De Instrucciones

 Open the appliance as briefly as possible.
 Ensure that the doors are always closed properly.

OPERATING NOISES

Normal noises
 Motors are running.
 Refrigerant is flowing through the tubing.

CLEANING AND MAINTENANCE

Do not use abrasive cleaning agents or solvents.
1. Set the temperature control knob to the 0 position and disconnect the mains plug from the mains
socket.
2. Take out the food and store in a cool location.
3. Clean the appliance with a soft cloth, warm water and detergent.
4. Wipe the door seal with clear water only and then wipe dry thoroughly.
5. After cleaning, reconnect and adjust the temperature control knob as desired.
6. Put the food back into the appliance.
The LED light in the fridge compartment cannot be replaced by the user. If the LED light stops working,
please contact the local authorised service agent.

TROUBLESHOOTING

If there is a problem with your appliance, please check the following points before contacting customer
service.
Problem
Appliance does No electricity at power outlet.
not operate.
Appliance is Cabinet not stable or level.
noisy.
Appliance not Temperature setting not correct.
cool
Frequent door openings.
Large amount of food recently
added.

SPECIFICATIONS

Brand
Appliance type
Possible causes
Proline
Fridge-Freezer Type I
15
Possible solution
Check that the plug is correctly connected
and power switched on.
See installation section.
See temperature control section.
Minimise door openings to allow
temperatures to stabilise.