App Installation; Network Configuration - Proscenic LDS D500 Manual De Usuario

Product Operation

3.APP installation

Please download APP"ProscenicHome" by sca-
ning the QR code or in Google Play or App Store.
·After the app installation, please follow the APP prompts to enter
network configuration. With APP, you can get more robot function
after connecting the robot wifi.
·The robot is not compatible with 5Ghz network.

Network Configuration

Network Configuration
1
press and hold "
start network configuration
Connect to Robot WIFI
5
Enter the page of Setting > WIFI in your phone,
choose wifi "Proscenic-XXXX".Reopen APP after
successfully connecting to wifi "Proscenic-XXXX"
Setting
WLAN
Proscenic-XXXX
AVAILABLE NETWORKS......
XXXXXXXX
XXXXXXXX
Network Configuration
Select and connect to the device network
according to the APP prompts
Device Choice
Proscenic-XXXX
Proscenic-XXXX
Cancel
Start network configuration
6
The wifi connection between APP and robot
begins.
Please wait until the connection completes.
"+" "for 3 seconds to
WLAN
WLAN
Setting
WLAN
Proscenic-XXXX
...
AVAILABLE NETWORKS
XXXXXXXX
XXXXXXXX
Device Choice
Proscenic-XXXX
Proscenic-XXXX
Refresh
Refresh
Cancel
Add a Devide
2
Make sure WIFI indicator flashes
3
Enter wifi password
4
WIFI Resetting
When the wifi connection between the mobile phone
and the robot fails, please reset the robot wifi by pre-
ssing and holding "
until you hear a voice prompt "WI-FI has been reset,
meanwhile, the WIFI indicator blinks. The possible
causes of connection failure includes router configur-
ation change, wifi password change, and etc..
4. Install the mopping module
Not recommended for first cleaning
① Stick Mopping Cloth on the bottom of water
tank, and press to make it straight.
·Do not mop home when no one is at home
·Do not use the mopping module on carpets.
07
Please select the purchased device
Please select the purchased device
......
LDS-xxxx
LDS D500/D550
LDS D500/D550
M7
H500
......
H600
Click or pull up to load more
Network Configuration
Hold Down " "+" "for 3 seconds until
you hear "Network Configuration Begins".
Hold Down " "+" "for 3 seconds until
you hear "Network Configuration Begins".
WIFI indicator flashes
Search Device Hotspots
" and " " for 3 seconds