Installation; General Information; Connecting Stereo Microscope To The Power Supply; Switching Stereo Microscope On Or Off - Zeiss Stemi 305 cam Instrucciones De Manejo

ZEISS
3

INSTALLATION

3.1

General information

Before installing and commissioning the device, make sure to read the Notes on Device
Safety carefully (see section 1.2, Page 3).
The Stemi 305 cam with the necessary tools and optional equipment is delivered in several standard
packages.
•
Take all units out of the packaging and check them for completeness according to the delivery note.
For installation and / or transport of the microscope or the stand, exclusively use the handle
(Fig. 3/4) provided to this effect.
•
Remove transport securing devices (adhesive tapes etc.).
•
Keep original packaging for a possibly extended period of storage or return of the device to the
manufacturer or dispose of it appropriately.
Fig. 5 Connecting the stereo microscope
16
INSTALLATION
General information
3.2 Connecting stereo microscope to
the power supply
•
Insert the mains cable (Fig. 5/2) in the mains
supply socket (Fig. 5/1) of the stand.
•
Connect the mains cable (Fig. 5/2) to a mains
supply socket outlet.
3.3 Switching stereo microscope ON or
OFF
•
Use the power switch (Fig. 5/3) to switch the
stereo microscope ON or OFF.
Utilization and configuration of the
Stemi 305 cam body (with integrated
camera) has been described in section 4,
as of page 17.
435063-9044-008
Stereo microscope
Stemi 305 cam
03/2015