cecotec Mambo 8090 Manual De Instrucciones página 15

ENGLISH
Blade assembly
Fix the sealing ring on the blades unit, introduce it in the jar and place it on the base's gap.
Hold the blades unit's top part firmly and turn the jar upside down. Make sure it is in its correct
position.
Install the fixing bracket to the jar's bottom part and turn it clockwise in order to fix the blades
unit to the jar.
To remove the blades unit from the jar, turn the fixing bracket anticlockwise. Make sure you
hold the blades unit firmly to avoid it from falling and causing damage.
Fig. 4.
Warnings:
Use a cloth to cover the blades unit before handling them to avoid injuries.
Assemble the fixing bracket and the sealing ring properly to avoid food or liquids being cooked
from splattering.
MamboMix spoon
This accessory is designed for kneading, stirring and mixing foods without cutting them.
Remove the blades unit by holding them tightly, turning the jar upside down and turning the
fixing bracket anticlockwise.
Warning:
Fig. 5.
Do not use this accessory for speeds over 3 as the jar could vibrate and result in risk.
Warning:
The distance between the MamboMix spoon and the jar's wall is 1 cm, therefore food might get
stuck. If this happens, the product's motor will stop operating as a self-protection method. Use
the spatula to mix and remove the stuck food for the appliance to resume the cooking process.
Measuring cup
The measuring cup is used as the product's lid to prevent splashing and heat loss and is used
to measure food quantity. Its maximum capacity is 150 ml.
When cooking with functions without temperature, place the measuring cup on the cover's
gap.
Turn it clockwise to lock it and anticlockwise to open it and take it out.
Fig. 6.
Warnings:
Use this measuring and no other accessory or object to close the jar's lid.
When cooking without setting temperature (mash, stir or mince), turn the measuring cup
counter clockwise until it fixes into place.
When cooking with temperature setting, place the cup in the lid's whole without locking it in
place. This way, steam will be able to be released safely.
28
Spatula
Fig. 7.
The spatula is the only tool suitable for stirring food inside the jar, other tools could scratch
and damage the surface.
It cannot be used while the product is operating with the blades or the butterfly whisk.
Butterfly
Fig. 8.
This accessory works installed on top of the blades unit, this way it helps mixing food and is
not cut by the blades. It helps food mixing and removes lumps.
Install the butterfly on the blades unit by matching the shaft's centre with the butterfly's gap
and push it down.
Warnings:
Do not operate the appliance unless the accessory is fixed in its place.
Do not operate it with speeds over 4.
Do not use the butterfly at the same time as the spatula.
Do not pour food in while it is operating with this accessory to avoid it from damaging or
getting blocked.
Basket
Fig. 9.
The basket allows carrying out different functions:
Straining, juicer or sauces, dips etc. After blending, cooking or preparing sauce, assemble the
basket in the jar and pour the mixture.
Cooking soft foods, such as pasta or noodles.
Cooking side dishes such as rice or potatoes.
Steamer
The steamer includes 3 parts: a small steamer, a big one and the lid.
Close the steamer with its lid before using it.
Place the steamer on the jar, making sure it fits.
Warnings:
Do not touch or get close to the steamer to avoid burns.
Do not cover the steamer's holes with any cloth or object. Steam may come out from the
edge or other parts causing risk of burns.
Allow steam to be released through the cover's middle hole and sides; this way, steam
circulation will be improved, allowing a more even cooking of foods.
ENGLISH
29