Getting Started; Receiving A Call; Making A Call - Daewoo International DTC-310 Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

GETTING STARTED

1. The unit requires 3×1.5V AAA batteries. Open the battery compartment cover and insert the
batteries in the right polarity, then close the cover (Proposal using alkali battery). There should
be time display on the liquid crystal screen after the batteries are inserted.
2. Insert one end of the line cord to the line jack of the base and the other end to the wall outlet of
exchange.
3. Connect the handset and the unit with coiled line.
4. Setting the dialing mode to correct mode according to the directions from your local telecom.
5. Apply for the caller ID from your local telecom office.

RECEIVING A CALL

1. When a call comes, the telephone rings, and LCD displays the seq. number of the call, the
date, time, incoming number and NEW icon. The NEW LED indicator will flash when missed
calls.
2. If the same number is received again, and the previous call has not been reviewed, the LCD
displays REP icon.
When the incoming memory is full, the latest incoming number replaces the oldest number in
the memory
NOTE: For the phone to display incoming number and other information, you must have
an active Caller ID subscription with your local telephone exchange company.
From handset
1. Pick up the handset and talk to the other party;
2. After finished, return the handset to the base.
Switch to speakerphone
1. When talking by handset, press SPEAKER key and return the handset to the base;
2. After finished, press SPEAKER key again.
From speakerphone
1. When the unit rings, press SPEAKER key and talk to the caller. For the other party to hear
your voice clearly, speak into the speaker from a distance of 32cm or less.
2. After finished, press SPEAKER key again.
NOTE: Generally telecom transmits the incoming message between the first ring and the second
ring. So please answer the phone after the second ring.

MAKING A CALL

From handset
1. Pick up the handset.
2. When hearing the dialing tone, dial the desired number.
3. The unit will start to time the conversation after 6 seconds.
4. After finished, return the handset to the base.
17

Publicidad

Tabla de contenido
loading

Tabla de contenido