Setting Menu - Daewoo International DTC-310 Guia Del Usuario

NEW INCOMING CALL LED
New call and ring LED is the same LED, when a new call comes in, the NEW LED is blinking,
when a new number has not been reviewed, the LED is blinking in 4s interval.
PREVENTING FSK MESSAGE TO AUTO-ADJUST REAL TIME
When FSK message comes, the unit adjusts real time automatically, the user also can prevent it
from auto-adjust real time as following:
1. In on-hook state, press and hold ALARM key for 3 seconds, LCD displays DATE OFF,
2. Press ALARM key again, LCD displays DATE ON,
3. Press SET key to quit.
NOTE: DATE OFF means: not allow auto-adjust real time.
REVIEWING, CALLING BACK AND DELETING OUTGOING NUMBERS
Reviewing
In on-hook state, press OUT key, then repeat to press OUT key to review outgoing number
messages one by one.
Calling back
1. In on-hook state, press OUT key to review the desired number, then press SPEAKER key or
pick up the handset, and the number is dialed out, or
2. Press REDIAL key, LCD displays PICK UP, press SPEAKER key or pick up the handset, the
number is dialed out.
Deleting
1. In on-hook state, press OUT key to review the desired number,
2. Press DEL key, it is deleted, or
3. Press and hold DEL key for 3 seconds, then all numbers are deleted.

SETTING MENU

In on-hook state, press SET key to enter setting menu, press UP or DOWN key to select among
different items. When you choose one item, press SET key again to go into its setting. After
finishing with one item, pressing SET key can also enter next setting item fleetly. If you want to
quit setting anytime, press DEL key to perform.
Setting date & time
1. In on-hook state.
2. Press SET key, LCD displays SET 1 DATE, press SET key, the year value flashes.
3. Press UP or DOWN key to edit the year.
4. Press SET key to confirm and enter the next value month setting.
5. Follow same steps to set month, date and time.
6. After setting, press SET key to confirm and enter next item setting.
19