Menu Operation - DeFelsko PosiTector SHD Manual Del Usuario

Gage functions are menu controlled. To access the Menu,
power-up the gage, then press the center navigation button.
To navigate, use the Up and
Down buttons to scroll vertically
to SELECT.
and
Press the (+) button to switch
pages in a multipage menu.
Press the (-) button to return
to the previous menu or page.
Select Exit to exit from any menu.
When powered-up, the PosiTector automatically
determines which probe is attached and does a self-check.
To disconnect a probe from a body, slide the plastic probe
connector horizontally (in the direction of the arrow) away
from the body. Reverse these steps to attach a different
probe.It is not necessary to power-down the Gage when
switching probes.
The PosiTector gage body accepts a wide variety of probe types
including magnetic, eddy-current and ultrasonic coating thickness,
surface profile, environmental, shore hardness and ultrasonic wall
thickness probes.
See www.defelsko.com/probes
The PosiTector SHD probe consists of
an indentor, calibrated spring and a
presser foot.
Two probe models are available for
measuring on a variety of materials:
PosiTector SHD-A (Shore A)
soft rubber, elastomers, neoprene, silicone, etc.
PosiTector SHD-D (Shore D)
hard rubber, epoxies, hard plastics, PVC, acrylic, etc.

Menu Operation

Previous Page
(Exit)
Access
the Menu
(Center / Select)
Probes
2
Up Next Page
Down