Description Of Display - Cebora WIN TIG DC 220 M Manual De Instrucciones

4 DESCRIPTION OF DISPLAY

then presents the main screen (factory setting). The operator
may start welding immediately and may adjust the current by
turning knob B.
S
R
Q
P O
As seen in the figure, the display is divided into sectors.
In each sector, settings operations may be conducted.
• To select sectors, press and release knob B so that
a sector is highlighted in red.
Turn knob B to select the desired sector, and then
briefly press knob B to access the settings of the se-
lected sector.
• The most recent setting is highlighted in green,
and boxed in red; with the new selection, the red box
moves to the new choice
IMPORTANT from now on, this procedure shall be
described indicating:
select and confirm
on confirmation, this symbol returns
to the screen previous to that in use
on selecting and confirming this
symbol,
shall be set
IMPORTANT to return to the main screen press
knob B (do not release immediately)
(> 0.7 sec.)
During start-
up, for 5 sec-
onds the dis-
play presents
all the informa-
tion regarding
the welding
machine soft-
ware versions.
The display
T
I
L
M
N
the factory parameters
4.1 SECTORI (WIZ)
This function enables rapid setting of the welding ma-
chine.
4.1.1 SETTING THE WELDING PROCESS (PARA-
GRAPH 5)
4.1.2 SETTING ARC IGNITION (PARAGRAPH 6 )
4.1.3 SET START-UP MODE (PARAGRAPH 7)
Select and
confirm the
WIZ sector.
The next
choice is au-
tomatically
displayed
Select and
confirm the
welding pro-
c e s s . T h e
next choice
is automat-
ically dis-
played.
Select and
confirm type
of ignition.
The next
choice is au-
tomatically
displayed.
Select and
confirm the
s t a r t - u p
mode.
The next
choice is au-
tomatically
displayed.
21