Grease Filters; Replacing Filter; Charcoal Filter - Viking Range 3 Serie Manual De Uso Y Cuidado

Cleaning and Maintenance

Grease Filters

Filters should be cleaned at least once a month. Never operate the fan or oven
without the filters in place.
1. Pull down slightly on the tab toward the front of the oven and remove the filter.
Repeat for the other filter.
2. Soak the filters in a sink or dish pan filled with hot water and detergent. DO NOT
use ammonia or other alkali; they will react with the filter material and darken it.
3. Agitate and scrub with a brush to remove embedded dirt.
4. Rinse thoroughly and shake dry.
5. Replace by fitting the filter back into the opening.

Replacing Filter

Charcoal Filter

Charcoal Filter, which was installed in your Built-in Microwave Hood, is used for nonvented, recirculated installation. The
filter should be changed every 6 to 12 months depending on use.
1. Disconnect power to the oven at the circuit breaker panel or by unplugging.
2. Remove the two top louver mounting screws. (See illustration.)
3. Pull the louver away from the unit.
4. Remove the charcoal filter holder by removing the center mounting screw.
5. Change the charcoal filter.
6. Replace the filter holder and center mounting screw.
7. Carefully push the louver back into place and replace the screws removed in step 2.
E
Screw
Charcoal filter
(white side faces front)
Screw
Louver
24
Grease filter
Tab
Screw