Changing The Door Hinge - Blaupunkt 5CB 28010 Montaje Y Modo De Empleo

Changing the door hinge

Changing the door hinge
If necessary, you can change the door hinge
of your refrigerator. This procedure requires
manual dexterity. Please read through the
following work steps completely before
beginning work.
You need the following tools:
– PH2 Phillips screwdriver
– 8 mm wrench
1. Ensure that the appliance is not
connected to the power supply.
2. Close both doors.
3. Disassemble the upper hinge plate. To
remove the screws, use an 8 mm wrench
or a Phillips screwdriver.
4. Take out the door of the refrigerator
compartment.
5. Disassemble the centre hinge (26).
(26)
(27)
6. Disassemble the mounting bracket
(27) and screw it again to the opposite
side.
7. Take out the door of the freezer
compartment.
8. Move over the lower hinge
(28) pin. Ensure that you move the
holding sleeve (29) for the hinge pin
along with it.
9. Insert the door for the freezer
compartment again and close it.
(26)
10. Reattach the centre hinge (26) on the
opposite side.
Page 49
(28)
(29)