Disclaimer Of Liability - Siemens Pointek CLS 100 Manual De Inicio Rápido

Pointek CLS 100 Quick Start Manual
Copyright Siemens Milltronics
Process Instruments Inc. 2004.
All Rights Reserved
We encourage users to purchase authorized
bound manuals, or to view electronic ver-
sions as designed and authored by Siemens
Milltronics Process Instruments Inc. Sie-
mens Milltronics Process Instruments Inc.
will not be responsible for the contents of
partial or whole reproductions of either
bound or electronic versions.
Note:
Use Pointek CLS 100 only in the manner outlined in this instruction manual.
Pointek CLS 100 is a compact 2-wire capacitance switch for level detection in constricted
spaces, interfaces, solids, liquids, slurries, and foam. The PPS (polyphenylene sulfide)
probe (optional PVDF [polyvinylidene fluoride]) is chemically resistant with an effective
process operating temperature range from -40 to 100 °C (-40 to 212 °F).
The Pointek CLS 100 versions:
• Integrated cable version with stainless steel process connection and probe options
of PPS or PVDF.
• All-plastic version has a thermoplastic polyester enclosure with a PPS process
connection combined with a PPS probe.
• Standard enclosure version with a thermoplastic polyester enclosure with a
stainless steel process connection in combination with a PPS or PVDF probe.
The Pointek CLS 100 approval types:
• General Purpose/Dust Ignition-Proof version (all-plastic and enclosure), providing
4/20 or 20/4 mA toggle output, and a relay output or solid state output.
• Intrinsically Safe version (enclosure or integrated cable), providing 4/20 or 20/4 mA
toggle output and solid state switch output for detection of high and low process
material levels.
Features
• NPT, BSPT process connections
• Corrosion resistant construction,
PPS, and 316 stainless steel (optional
PVDF wetted parts)
• Non-polarized, solid-state switch or
relay output (all plastic version only)
7ML19985QJ81
While we have verified the contents of this manual for
agreement with the instrumentation described, varia-
tions remain possible. Thus we cannot guarantee full
agreement. The contents of this manual are regularly
reviewed and corrections are included in subsequent
editions. We welcome all suggestions for improvement.
Technical data subject to change.
Pointek CLS 100 – QUICK START MANUAL

Disclaimer of Liability

Applications
• Liquids, slurries, powders, granules,
and solids
• Foods and pharmaceuticals
• Chemical and petrochemical
• Relatively high pressure and
temperature
• Hazardous areas
Page EN-1