Installation; Packing Material; Range Location; Cabinet Opening - Amana ARR6300 Serie Manual Del Propietário

Installation

Packing Material

Remove protective packing materials from range. Tape
residue can be cleaned with a soft cloth and alcohol.

Range Location

Underwriter's Laboratories, Inc. specifies range can be
installed flush against right and left base cabinets, and
rear vertical wall. Range can also be installed flush
against left or right vertical wall extending above 36 inch
standard countertop height.

Cabinet Opening

WARNING
To avoid risk of burns or fire by reaching over
elements, cabinet storage space located above range
should be avoided.
Range should extend approximately 2 inches from cabinet
front to oven door handle. Using dimensions below,
prepare cabinet opening.
Range Dimensions:
Width—30 inches
Depth—25½ inches (Stand offs to side panel front)
Height—36 inches
Standard Cabinet and Countertop Height
1"
Wall
35"
Minimum Clearances to Combustible
Surfaces
• Minimum clearance to rear wall is 0 inches.
• Minimum clearance to a vertical right or left side
wall is 0 inches.
• Minimum clearance to countertop/cabinet on each
side is 0 inches.
• Minimum of 30 inches between top of cooking
surface and bottom of an unprotected wood or
metal cabinet.
• Minimum of 24 inches between cooking surface and
protected wood or metal cabinet above range.
Cabinet bottom must be protected by at least ¼
inch thick millboard with not less than No. 28 MSG
sheet steel, .015 inch thick stainless steel, .024
inch thick aluminum, or .020 inch thick copper.
A—30 inches minimum
B—30 inches unprotected/24 inches protected
minimum
C—13 inches maximum
D—25 inches maximum
E—36 inches maximum
F—30 1 / inches minimum
8
5