This section contains information useful for maintaining the characteristic of ecocompatibility included in the origin
design of the machine, and as regards proper use and disposal of chain oil
USE OF THE MACHINE
The operations of filling the oil tank should be carried out in such a way as to avoid spilling oil and contaminating the
soil and the environment.
DISPOSAL
Do not dispose of the machine inappropriately when it is no longer usable. Deliver it to an authorized organization for
proper disposal in compliance with the regulation in force.
The symbol
on the product or on its packaging indicates that this product may not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by inappropriate waste handling of this
product. For more detailed information about recycling of this product, please contact your local council office, your
household waste disposal service or the shop where you purchased the product.
Make sure the main
line is powered
Make sure the machine
is properly plugged in
Make sure your
cable/ext. cord is not
damaged
Make sure that chain
brake is not activated
Check that chain is
properly assembled
and tensioned
Check chain
lubrification as in
chapters F and G
Make sure that the
chain is sharp
Check cut-out switch
is activated
Contact your
authorised centre
35cm
Chain
Guide Bar
40cm
Chain
Guide Bar
I. ENVIRONMENTAL INFORMATION
J. TROUBLESHOOTING TABLE
Motor does
Motor turns
not start
with difficulty
or loses
power
•
•
•
•
•
•
•
•
K. REPLACEMENT PARTS
CHO022
BRO026
CHO028
BRO037
ENGLISH - 8
The machine
Motor turns
starts but
improperly or
does not cut
at reduced
properly
speeds
•
•
•
Part no.:
505513422
Part no.:
531024226
Part no.:
505513428
Part no.:
531024237
Braking
devices do
not stop the
chain properly
•
•