General Safety Instructions; Special Safety Instructions - Clatronic DB 2707 Instrucciones De Servicio

4....-05-DB 2707
• Read the operating instructions carefully before putting the appliance into ope-
ration and keep the instructions including the warranty, the receipt and, if possi-
ble, the box with the internal packing.
• The appliance is designed exclusively for private use and for the envisaged pur-
pose. This appliance is not fit for commercial use. Do not use it outdoors (except
if it is designed to be used outdoors). Keep it away from sources of heat, direct
sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the
appliance with wet hands. If the appliance is humid or wet, unplug it immediate-
ly. Do not put it in water.
• When cleaning or putting it away, switch off the appliance and always pull out
the plug from the socket (pull on the plug, not the cable) if the appliance is not
being used and remove the attached accessories.
• Never leave the appliance unsupervised. To protect children from the dangers
posed by electrical appliances, make sure that the cable is hanging low and that
children do not have access to the appliance.
• Check the appliance and the cable for damage on a regular basis. Do not use
the appliance if it is damaged.
• Do not try to repair the appliance on your own. Always contact an authorized
technician. To avoid the exposure to danger, always have a faulty cable be
replaced only by the manufacturer, by our customer service or by a qualified
person and with a cable of the same type.
• Use only original spare parts.
• Pay careful attention to the following "Special Safety Instructions".
• WARNING! The ironing base becomes hot very quickly and takes a long time to
cool down. Please do not touch it.
• When the iron is not in use it should be placed on its stand.
• Before filling the water tank remove the mains lead. Please do not fill the water
tank higher than the MAX mark.
Numbering of the Controls
1 Temperature regulator
2 Control lamp
3 Spray button
4 Steam jet button
• Clean the ironing base with a slightly damp cloth.
• Fill the water tank through the filler aperture with pure water (up to degree of
hardness 2). If the tap water is harder please use distilled water. Please use a
filling container.
06.02.2002 16:56 Uhr

General Safety Instructions

Special Safety Instructions

First Use of the Machine
Seite 27
5 Steam quantity regulator
(removable)
6 Filler opening for the water tank
7 Spray nozzle
8 Viewing window for the water tank
GB
27