Transmitting Unit Operation - AUtec E16 Serie Manual De Usuario

6 TRANSMITTING UNIT OPERATION

POWER ON AND STARTING
1
To switch on the transmitting unit, insert
the starting key and turn it to "I".
2
To start the radio remote control func-
tions, press the START pushbutton (or
turn the selector switch) for 1-2 sec-
onds.
After starting, the green signalling LED
always lights up.
TYPE
slow blinking
fast blinking (*), accom-
panied by intermittent
sounds from the buzzer
steady LED (*) at starting,
accompanied by the con-
tinuous sound from the
buzzer
(*) Green or red LED.
LIESNMU4
1 2
LED SIGNALS
MEANING
NORMAL OPERATION
LOW BATTERY. The transmit-
ting unit switches off 3.5 min-
utes after the LED starts
flashing
ONE OR MORE (movement)
ACTUATORS and/or STOP
PUSHBUTTON INSERTED
6 - Transmitting unit operation
COMMAND
ACTIVATION
Activate the joystick and/or se-
lector actuators relevant to
whatever movement or selec-
tion command is to be carried
out.
ACTION
///
switch off the transmit-
ting unit and replace
the battery
release all actuators
and/or the STOP push-
button
Page 27 of 80