Operation - cecotec CONGA 1690 Manual De Instrucciones

• Add some cleaning agent if considered necessary.
WARNING: The excess of cleaning agents might block water outlets.
• To remove it, press the Wet & dry tank release button and pull from the Wet & dry tank.
WARNING: In order to achieve perfect scrubbing, it is suggested to moisten the mop before
using it.
DUST TANK INSTALLATION

5. OPERATION

• Once the robot's light indicator changes from blinking orange to steady blue, the battery
is fully charged and the robot is ready to operate.
• The robot cannot operate with low battery.
• Remove all cables and obstacles from the floor before operating the robot in order to
avoid accidents and damage.
ROBOT BUTTONS
1. Auto mode
From the standby mode, press
automatically start operating.
It is the most commonly used cleaning mode and it is used to clean the 100 % of the house's
1. Open the robot cover.
2. Make sure the dust tank is empty and insert
it in its position.
3. Close the cover again.
on the robot or the remote control and the robot will
ENGLISH
27