cecotec CONGA 1690 Manual De Instrucciones página 32

Ocultar thumbs Ver también para CONGA 1690:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 4
ENGLISH
Random mode
Select this mode from the App, the robot will start cleaning randomly and then will return
to the charging base with its smart technology once it runs out of battery. The robot will not
create any map under this mode.
Gyro mode
Select this mode from the App. When this mode is activated, the robot will carry out a whole
cleaning cycle in zig zag and then in Edge mode. Once it has finished, it will automatically
return to the charging base. If it has not started the cleaning cycle form the charging base, it
will return to the starting point.
Twice mode
Select this mode from the App, the robot will carry out 2 whole cleaning cycles with Gyro mode.
When the cycle is completed, it will return to the charging base with its smart technology.
Scrubbing mode
Select this mode from the robot buttons or from the App. When this mode is activated, the
robot moves in a swaying motion, simulating real scrubbing moves. It starts off cleaning in zig
zag motion, then in Edge mode, and finally returns to the charging base taking the straightest
way and memorizing the route. If it runs out of battery before finishing, it will recharge and
the resume cleaning until finished.
Use the App to enter the water-intensity mode and select the desired intensity and select
between 1, 2 or 3 (see WATER INTENSITY/TIME SETTINGS section). With this mode, the robot
will carry out a cleaning cycle in Gyro mode and in Edge mode, moving forward 2 metres and
then backwards 1 metre consecutively, simulating a real scrubbing movement. It will finish
off in Random mode, returning to the charging base if necessary to finish cleaning, and finally
returning to the charging base when it runs out of battery.
Warnings:
Do not use the mop outdoors.
Remove the carpets before operating the robot under this mode.
During operation, control the water level on the Wet & dry tank. If it empties, fill it up
again before continuing scrubbing.
Take the Wet & dry tank and the mop out before charging the robot.
Note: In order to ensure perfect scrubbing, moisten the mop before starting scrubbing.
Manual mode
32

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido