Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4. OPERATION
4.1 TOUCH DISPLAY
1.
Power button
2.
Wi-Fi indicator light
3.
Battery indicator light
1.
ON/OFF
•
Press
to start the robot up.
•
From the standby mode:
- Press
to start auto cleaning mode.
- Hold down
- Hold down
•
During operation:
- Press
to stop operation.
•
During charging:
- Press
to enter auto cleaning mode.
2.
Wi-Fi indicator light
•
When entering network configuration (see before section), the white light will blink
slowly.
•
When the device connects to the Wi-Fi, the white light will turn steady.
•
If the device fails to connect, the white light will blink faster.
3.
Battery indicator light
•
The light will turn red when the battery is low.
•
The light will switch from blue to red alternately during charging.
•
The light will turn steady blue when it is totally charged.
4.2 BATTERY CHARGING
1.
Charging base
•
Place the charging base against the wall.
•
Remove any obstacle from around the charging
base, following the safety distances shown on the
below picture:
•
Always turn the robot's power switch ON before
placing it on the charging base.
2.
Connection
•
Plug one of the adapter ends into the robot's charging socket and the other to the
power supply. (Fig. a)
1
from 3 to 5 seconds to enter network configuration.
for 7 seconds to enter sleeping mode.
2
3
ENGLISH
25
Hide quick links:
Publicidad
Tabla de contenido
Solución de problemas
