Cleaning Modes - cecotec CONGA 1490 Manual De Instrucciones

ENGLISH
Schedule
The robot is provided with a schedule function in order to
provide a maximum-efficiency cleaning. The time settings and
the cleaning schedules must be carried out from the App. Once
the robot has been scheduled, it will automatically carry out
the cleaning cycles every scheduled day.
Note: make sure the robot is activated and that the light indicator is lighted before
scheduling any cleaning or setting time.

4.5 CLEANING MODES

The robot offers different cleaning modes which adapt to different cleaning needs.
1. Auto cleaning mode: From the standby mode, select Auto mode on the App for the robot
to start cleaning automatically. It will carry out a cleaning cycle in Gyro mode, Edge mode
and then will finish off in Random mode. It is the most commonly used cleaning mode and
it is used to clean the 100 % of the house's surface. The robot vacuums the floor's dust
automatically, in and organized and efficient way, as it features memory and gyroscopic
navigation. Moreover, it changes direction when it finds obstacles throughout its route
and it returns to the charging base in a smart and direct way once the cleaning is over.
It includes TotalClean function, therefore the robot cleans the whole surface, returning
to the charging base if necessary until it finishes it. Once it has completed cleaning, the
robot will operate in Random mode until it runs out of battery.
2. Edge mode: Select Edge mode on the App, the robot will clean along the edges and will
return to the charging base through its smart technology once it has finished. If there is
no charging base, the robot will return to the starting point.
3. Area mode: Select Area mode on the App , the robot will clean a 2*2 m.
4. Random mode: Select Random mode on the App, the robot will start cleaning randomly
and then will return to the charging base with its smart technology once it runs out of
battery. The robot will not create any map under this mode.
5. Twice mode: select Twice mode on the App, the robot will carry out a whole cleaning cycle
following the next pattern: Gyro mode, Edge mode, Gyro mode and Edge mode again.
When the cycle is completed, it will return to the charging base with its smart technology.
6. Scrubbing mode: The display will show MODE 6. With this mode, the robot will carry out
a cleaning cycle in Gyro mode and in Edge mode, moving forward 2 metres and then
backwards 1 metre consecutively, simulating a real scrubbing movement. It will return to
the charging base if necessary to finish cleaning, and finally will go back to the charging
28