OHAUS Pioneer Manual De Instrucciones página 30

Set the displayed readability of the balance.
10 Divisions = readability is increased by a factor of 10.
For example, if the standard readability is 0.01g, selecting 10 Divisions will result in a displayed reading of 0.1 g.
Set the current date format.
YYYY/MM/DD
DD/MM/YYYY
Set the date in the current date format.
For example, if the date format is MM/DD/YYYY, the date could be set as "06/22/2017 Thu".
Set the current time format.
12HR
Set the time in the current time format.
For example, if the time format is 24HR, the time could be set as 08:00:00.
Set the brightness of the display.
Low
High
Set whether the balance automatically turns off the display backlight of the display.
10 minutes = become dim if there is no motion for 10 minutes
20 minutes = become dim if there is no motion for 20 minutes
30 minutes = become dim if there is no motion for 30 minutes
Off = disabled
When the capacity is set On, a capacity bar will display at the bottom of the screen. The capacity bar will roughly
show the current weight as a percentage of balance capacity. When the display is at zero, the capacity bar will not
display.
GlobalScientificSupply
www.
GLOBAL SCIENTIFIC SUPPLY
.com
The Laboratory Supply Company!
info@GlobalScientificSupply.com