HP MediaSmart SL4782N Guía Del Usario página 26

Standard Definition Input: Connect an
S-Video cable, or a composite video cable, and
left-right audio cables from the cable or satellite
set-top box. (Audio L and R connectors are shared
within the AV connector set.)
The AV Input connectors are:
1: S-Vid or Video, and Audio L and R
2: S-Vid or Video, and Audio L and R
n
The Standard Definition Input (S-Vid or
Video) connectors do not pass
high-definition TV signals.
To connect the set-top box:
c
CAUTION: Before connecting the set-top
box, unplug power for the TV and all
connected components.
1
Connect the set-top box input source cable(s) to
the rear of the TV, using one of the connector sets:
Digital High Definition Input: Connect
an HDMI cable to any of the HDMI
connectors: HDMI 1, HDMI 2, or HDMI 3.
Or
Connect a DVI-D cable and DVI-to-HDMI
converter from the digital, high-definition
cable or satellite set-top box with a DVI
connector to HDMI 1, and left-right audio
cables to Audio In L and R.
Component High Definition Input:
Connect component video cables and left-right
audio cables to the Component connectors:
1: Y, Pb, and Pr, and Audio L and R
Or
2: Y, Pb, and Pr, and Audio L and R
13
Setting Up the TV