Radio Mode - Clatronic AR 735 CD/MP3 Instrucciones De Servicio

• If the AF symbol appears in the display, the AF func-
tion is switched on and RDS transmission data is
being received.
• If the AF symbol fl ashes in the display, the AF func-
tion is selected but no RDS signal can be received
at the moment.
• Press the A.F button again to switch off this func-
tion. The AF symbol in the display goes off.
14. ST/TA Button
a) Radio Operation
STEREO/MONO switching. Keep the ST/TA button
pressed down fur approximately 3 seconds.
b) TA Traffi c Announcement
(Priority for Traffi c Information)
The TA function is activated by pressing the ST/TA but-
ton briefl y. The TA symbol appears in the display.
If an UKW/FM station is being received which transmits
the latest traffi c announcements from time to time, the
TP display lights up.
When the TA function is switched on, the FM traffi c an-
nouncements automatically interrupt CD operation (The
word TRAFFIC appears in the display). The volume
level is increased to the minimum value for the transmis-
sion of traffi c announcements.
After the traffi c announcement has fi nished, the pro-
gramme that was previously running is resumed.
Interruption of the TA Function:
If you would like to interrupt the current traffi c announce-
ment, press the ST/TA button briefl y. The TA mode is
switched off as a result.
NOTE:
If no traffi c information is being received, „NO TP, TA"
appears briefl y in the display.
15. LCD (liquid crystal display)
16. CD Slit
Insert the CD with the labelled side facing upwards gently
into the CD slot until the device draws in the CD automati-
cally.
17. Eject Button
Press this button to eject the CD.
18. DISP Button (Display)
a) Radio mode:
• When RDS data is being received, press this button
several times briefl y in order to bring up the follow-
ing display:
PS Name
• If no RDS data is being received, the following is
shown:
Time
05-AR 735 CD.indd 57 05-AR 735 CD.indd 57
Time Frequency PTY
PTY Frequency
b) CD Mode
• If this button is pressed briefl y several times, the
following appears in the display:
Time Station tuned into in the background
Frequency
• The display remains visible for approx. 5 seconds
before the device returns to the original display.
c) In order to set the time, keep the DISP button pressed
down fur approximately 3 seconds with the time
displayed. The time fl ashes in the display. Then press
the „-" button (2) in order to set the minutes, and the „+"
button (2) to set the hours. To store the time press the
DISP button again briefl y.
19. Flashing LED (not shown)
When the front control panel is removed this display fl ashes.
PTY
57
17.10.2008 12:36:37 Uhr 17.10.2008 12:36:37 Uhr