Textron Jacobsen Eclipse 2 118 Manual Tecnico página 18

4 CONTROLS
Operator Mode is used by the operator for system voltage information, travel speed, FOC setting, reel speed, and total
hours on mower. Press the orange buttons (K and L) on the front handle cover to toggle between the different displays.
Operator Mode is view only, only screen illumination mode can be changed.
Display
Start-Up Screen - Displays for up to five seconds when system is started.
System Voltage - Displays system voltage between 42 and 59 volts. Screen will be replaced
with alert screen when system voltage drops below 42 volts or rises above 60 volts.
FOC Setting - Displays FOC (Frequency of Clip) setting. When FOC is set to 0, reel will operate
at the fixed reel speed.
Fixed Reel Speed - Displays fixed reel speed setting with FOC set to 0. Fixed reel speed setting
is not used for any FOC other than 0.
Hour Meter - Displays total hours unit has been operated.
Daytime Illumination - When selected, LCD displays dark pixels on a light background. Press
the black button (J) to toggle between daytime and nighttime illumination.
Nighttime Illumination - When selected, LCD displays light pixels on a dark background. Press
the black button (J) to toggle between daytime and nighttime illumination.
Maintenance Mode PIN - Used to enter Maintenance Mode. Maintenance Mode pin is required.
See Maintenance Mode.
en-18
Description