Cleaning And Maintenance; Changing Light Bulbs - Teka DPL 110 ISLA Manual De Instrucciones

Adjustment of the clock
1) Push the on/off' button for 3 seconds.
2) Adjust the hour digits by pressing '+'
or '­'.
3) Push the on/off' button again.
4) Adjust the minute digits by pressing
'+' or '­'.
5) After 3 seconds your settings are
saved automatically.
Filter saturation indicator "F"
When the sign 'Saturation of the filters'
is on, the filters should be cleaned.
After cleaning the filters, simultaneously
push "+" and "­" for at least 3 seconds
whereupon the sign will be switched
off.

Cleaning and maintenance

During cleaning and maintenance
work, make
instructions are complied with.
Cleaning the hood body
• If your kitchen hood is made of
stainless steel, use proprietary cleaners
mentioned in the product instructions.
• If your kitchen hood is painted, use
lukewarm water and a neutral soap.
• Never use metallic scourers, nor
abrasive or corrosive products.
• Dry the kitchen hood using a cloth that
does not produce fibres.
• Do not use vapour cleaners
sure the safety
Cleaning the metal filters
• To remove the filters from their fittings,
press lightly on the locks and then pull
them off.
• The metal filters can be cleaned by
soaking them in hot water with neutral
detergent until the fat dissolves and
then rinsing them under the tap or using
special anti­grease products. They can
also be washed in a dishwasher. In
this case, it is advisable to stack them
vertically to avoid food residues to stick
to them.
• Cleaning in a dishwasher may damage
the metallic surface (blackening it),
although this will not affect its fat
retention capacity.
• Once clean, leave them to dry off and
then fit them onto the kitchen hood.

Changing light bulbs

For changing the light bulbs please contact
the manufacturer's
Service.
nearest Technical