Remote - AKASO V50 Pro SE Manual De Instrucciones

WARNING: Do not drop, disassemble, open, crush, bend, deform, puncture, shred,
microwave, incinerate or paint the camera or battery. Do not insert foreign objects
into the battery opening on the camera. Do not use the camera or the battery if it
has been damaged for example, if cracked, punctured or harmed by water.
Disassembling or puncturing the battery can cause an explosion or fire.

REMOTE

How to Connect the Remote to Camera?
1. Press Power/Mode Button to turn on the camera.
2. Enter Setup → General, turn on the RF.
3. Turn on the remote.
The operation method of the two versions of remote controls will be slightly different,
please operate as illustrated below:
Splashproof only, not waterproof
18
Power Button
Video Button
Photo Button
Power Button
Press the Power Button for 3s to turn on/off the remote.
VIDEO
To record Video, verify the camera in Video mode.
To start recording:
Press the Grey Video Button. The camera will emit one beep and the camera light will
flash while recording.
To stop recording:
Press the Grey Video Button again. The camera will emit one beep and the camera light
will stop flashing while recording.
PHOTO
To capture a photo, verify the camera in Photo mode.
To take a photo:
Press the Red Photo Button. The camera will emit a camera shutter sound.
Photo Button
Video Button
Splashproof only, not waterproof
19