System Settings - Welby ABO 523 Manual Del Usuario

USA

System settings

System settings
The system settings allow you to select users, and set
date, time and time format.
1. After the blood pressure monitor is powered, press
the SET button
Do not press the START/STOP button
moment.
A user icon ( or )
2. Press the M button
user icon 2.
This allows up to two users to save and accumulate
the test results (60 memory slots per user).
3. Press the SET button to confirm the setting.
A message " " (year) will show on the display.
4. Press the M button to set the year and then press the
SET button to confirm.
5. Repeat steps 3 to 4 to set the month, date, hour time
and minute time.
The date
20
corner of the display.
6. After the minute time is set, press the M button to
select 12-hour time format or 24-hour time format.
The 12-hour time format is indicated by the message
" " and the 24-hour time format by " ".
7. Press the SET button for the voice readout setting.
Press the M button to set it " " (ON) or "
8. Press the SET button for the volume level setting.
20
greaterconcepts@live.com
.
4
will show on the display
14
to select either user icon 1 or
2
and time
21
3
are shown at the lower left
815-342-5850
USA
at this
.
1
" (OFF).