Welby ABO 523 Manual Del Usuario página 27

the pressure is stablized before the measurement.
During this time, the air release indicator
flashing on the display.
6. The cuff will be initially inflated to a pressure of
190 mmHg. You will feel it tightening.
If your systolic blood pressure is over 190 mmHg, the
blood pressure monitor will automatically re-inflate
the cuff to measure the blood pressure.
7. As soon as the pulse rate is detected, the pulse rate
indicator
17
this time, avoid speaking and moving any body
parts.
8. Once the measurement is complete, the air will be
released from the cuff.
The systolic blood pressure
pressure
16
display. The measurements will also be read out in
English.
The corresponding WHO blood pressure classification
indicator
25
classification").
AFTER SALES SUPPORT
Performing a measurement
will start to flash. Keep relaxed during
and pulse rate
will also be shown (see chapter "WHO
815-342-5850
USA
, diastolic blood
15
will be shown on the
18
USA
will be
24
27