Preliminary Remarks; Designated Use; Safety Instructions; Disassembly And Disposal - HOMMELWERKE T500 Manual De Instrucciones

0 Preliminary remarks

0 Preliminary remarks
0.1

Designated use

0.2 Safety instructions

0.3 Disassembly and disposal

2
The HOMMEL TESTER T500 was in perfect
condition when shipped from the factory.
Nevertheless its use may constitute a risk to
the user or third parties, or cause damage to
the machine and the other materiel property
if used contrary to its intended use.
The HOMMEL TESTER T500 must only
be used in technically perfect condition in
accordance with its designated use and
the instructions set out in the operating
manual.
Operating the HOMMEL TESTER T500
within the limits of its designated use in-
volves using the machine only for rough-
ness measurements tasks .
Using the machine for purposes other
than those mentioned above (such as for
other workpieces or measurement tasks
or using the measuring electronics for
other purposes) is considered contrary to
its designated use!
Hommelwerke GmbH cannot be held
liable for any damage resulting from
such improper use! The risk of such
misuse lies entirely with the user!
Please observe the safety instructions in
each chapter of this manual!
The following components could require
disposal: steel scrap, plastic materiel,
electronics (control unit and measuring
electronics).
T500