HOMMELWERKE T500 Manual De Instrucciones página 68

2.3.5 Set-up mode
Changing the measuring parameters (setting loops)
d
d
m
Traverse length
d
m
d
m
Measuring range
d
m
26
General procedure:
1. Select the parameter to be changed with
d .
2. Keep the m key depressed until the al-
phanumeric display flashes. The setting
loop belonging to the displayed param-
eter is active.
3. Turn the d while keeping the m key de-
pressed until the desired value is dis-
played.
4. Release the m key: the new value is now
set. The display loop is active again.
Measuring range MB1:
+20µm to – 60µm
Measuring range MB2:
+40µm to – 120µm
T500