TEMPERATURE
SELECTION
Fig A
The temperature is controlled by adjusting/setting the thermostat control
knob. To start the unit and achieve maximum cooling quickly.
Turn the temperature control knob clockwise to the furthest (maximum)
setting on the blue (wide) section of the graduated control dial. (Fig A)
Allow the unit to run at this setting for 3-4 hours.
When maximum cooling is achieved, turn back the
temperature control knob to a moderate/medium temperature.
To turn off the wine cooler (no cooling) rotate the
control knob to the "0" (off) position. (Fig B)
Turn the control to the "OFF" (0) position to temporarily
disconnect the cooling cycle. When the wine cooler is
not to be used for long periods of time, disconnect
from power and leave the door partially open.
NOTE: If the unit is unplugged, power lost, or turned off; you must wait 3
to 5 minutes before restarting the unit.
14
Fig B