Introduction; Intended Use/Indications For Use - Sunoptic Surgical LED Rover IV+ Instrucciones De Utilizacion

1.

INTRODUCTION

The LED Rover IV+ is a Light Emitting Diode (LED) and battery unit designed to couple
onto the light post of commercially available endoscopes having an ACMI or Wolf light
post. The LED Rover IV+ is made to take the place of conventional light cables and
remote light sources. It couples to the endoscope in the same fashion as a conventional
light cable by press fitting onto the endoscope's light post
by a single "18650" size lithium-ion 3.7V rechargeable battery.
The battery powers an LED via a current converter that supplies a constant current to the
LED. The light is directed into the light post of the scope. The light is then carried by
internal fiber optics to the scope to illuminate the target.
2. INTENDED USE / INDICATIONS FOR USE
The LED Rover IV+ is used to illuminate the site of surgery during minimally invasive
surgical procedures in arthroscopy (orthopedic surgery), laparoscopy (general and
gynecological surgery) and in Endoscopy (general, gastroenterological and ENT surgery).
The light is transmitted from the light source through a scope.
LIT-226 Sunoptic Technologies
Rev. B
®
Page 3 of 35
.
The LED Rover IV+ is powered
(English)