Noise/Vibration Information - KRESS 600 PSE Instrucciones De Servicio

Ocultar thumbs

Contenido

Idiomas disponibles

600 PSE - GB Seite 7 Freitag, 18. Juni 1999 12:57 12

600 PSE

Application

The Pneumatic Drill Hammer can be used universally

for impact drilling, for light chiselling work in masonry

and for drilling as well as screwdriving in wood, metal

and plastic.

Safety Instructions and

Accident Prevention

Before putting the machine into operation, read

through these operating instructions completely and

observe the safety instructions contained therein as

well as those in the enclosed booklet on general

safety instructions for electro-tools.

If the mains cable is damaged while working, pull

the mains plug immediately.

Never work with a damaged mains cable.

Wear protective glasses, hearing protection, pro-

tective gloves and sturdy shoes.

For safety reasons, work only with the auxiliary

handle 12 mounted.

Do not work with materials containing asbestos.

Do not carry the machine by the cable.

The mains receptacles in the working area must be

protected by a residual current circuit breaker (RC).

For the attachment of identification markings on the

machine, do not drill into the housing. The protec-

tive insulation would be shorted. Use stickers.

When the drill unexpectedly jams, the machine

kicks back. Therefore, always take a secure stance

and hold the machine firmly with both hands.

Illustration

1 Tool holder

2 Dust protection cap

3 Unlocking collar

4 Rotation stop switch

5 Locking button for on/off switch

6 On/Off switch/Speed control

7 Ventilation slots

8 Latch for mains cable module

9 Rotational direction switch

10 Drilling/Impact drilling selector

11 Holder for depth stop

12 Auxiliary handle

13 Adapter for screwdriver bits/drill chuck

Accessories illustrated or described are not always

included as standard delivery items.

Technical Data

Pneumatic Drill Hammer

Article number

Input power

Output power

Electronic speed control

No-load speed

Speed under load

Load impact rate

while hammer drilling

Impact energy

Right/Left rotation

Clamping collar dia.

Tool holder

Drill dia., max.

Steel

Light metal

Wood

Hammer drilling in conctrete

Recommended hammer drilling

range

Screw dia., max.

Wood

Sheet metal

Weight

Protection class