How To Maximise Your Security And Protection Of Your Machine - Pecol MCSDSP1500PRO Manual Del Usuario

1. How to maximise your security and protection of your machine

Failure to observe at least the following instructions may cause immediate damage to
the user and/or the equipment.
1. Follow the safety recommendations in this manual (see pages 57 and 58).
2. Take into account the effects of kickback and attitudes to minimise it (see pages
59 and 60).
3. Do not fix the drill or accessories with dirt and do not use drill or accessories
of poor quality or poor conservation. Do not carry out any adaptation of accessories,
parts, etc. (see pages 58, 61, 62, 63 70 and 71).
4. Do not allow abrasive particles, water and other foreign matter inside the SDS
Plus chuck and always keep it lubricated (see pages 61 and 66).
5. Do not use grease other than that recommended or supplied by PECOL and do
not mix lubricants (see pages 61, 66, 67 and 71).
6. Do not rotate the mode select button until the machine is completely stopped
(page 61).
7. Carry out maintenance only in accordance with this manual or the PECOL
Technical Assistance Service (see pages 65 to 70).
8. Do not connect to a power grid that is not compliant with the intended use of the
power tool (see pages 54, 68 and 69).
9. Do not use the SDS Plus docking chuck in combination with hammering modes
(see pages 62).
10. Do not carry the machine, drills and accessories to the limit of its capacity (see
pages 54, 58, 59, 60, 62, 63, 64, 67, 68 and 70 ).
11. Do not put excess grease on the pneumatic system casing (page 69).
FR EN ES
P.53
PT