Pentair Raychem RAYSTAT-ECO-10 Manual Del Usuario página 12

3. Parameters
The first parameter to show up during Set-up mode is the Set Point.
Other parameters, their default, minimum and maximum values are
shown in the below table:
Parameter
Set Point (°C)
Min. Expected Ambient
2
Pipe Size
Heater Operation if Sensor Error
Voltage Free Operation
1
Min. Expected Ambient Temp. is the temperature whereby the heating
cable is energized for 100%.
Min. Expected Ambient Temp. can only be set in steps of 10 K.
Min. Expected Ambient = Low Temp. Alarm.
2 Select Pipe Size Diameter:
3 for pipes ≥ 2 inch.
2 for pipes ≥ 1 inch.
1 for pipes < 1 inch.
12
Default
1 (°C)
Displayed
value Code
3
-20
1
1
0
Min. Max.
0 30
-30 0
1 3
0 (OFF) 1 (ON)
0 (NO) 1 (YES)