Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Manual 5300.qxd
18/06/04
11:29
Página 30
Chronothermostat 5300
INSTRUCTIONS
IMPORTANT
Congratulations. You have chosen a crono-thermostat
that thanks to its simplicity, will allow you, by properly
adjusting its functions, to make the most of its installation
possibilities.
ADJUSTING THE CURRENT DAY AND HOUR
• Press the
key to go to the main screen.
SET
• Press the
key. The day of the week starts
DIA Y
flashing.
HORA
• With the keys
adjust the day.
• Press
DIA Y
. The hour starts flashing.
HORA
• With the keys
adjust the hour.
• Press
DIA Y
. The minutes start flashing.
HORA
• With the
keys adjust the minutes.
• Press the
key to finish the programming and
SET
go back
to the main screen.
PROGRAMMING
In the crono-thermostat CEPRA 5300 you can establish a
daily programming (every day of the week have the
same daily program) or a weekly program (different pro-
grams for each day of the week).
By default, the crono-thermostat has the following daily
programming:
Start
Consignment
Slot
time
temperature
P1
7:00
P2
9:00
P3
12:30
P4
15:00
P5
17:30
P6
23:00
For the CEPRA 5300 to adopt the established program,
it is necessary that the time program is increasingly orde-
red, being the minimum time for the first period P1,
00:00 and the maximum time for the last period P6,
23:50.
The start time of each slot and the consignment tempe-
rature can be modified in the following way.
Daily programming
(The same programming from Monday to Sunday)
• Press the
key to go to the main screen.
SET
• Press the
key and keep pressing it, then
SET
press
to go to the programming.
PROG
LU-DOM
3 3 0 0
20ºC
17ºC
20ºC
19ºC
22ºC
17ºC
Publicidad
Tabla de contenido
