Chicco TRIO FOR ME NACELLE Instrucciones De Uso página 16

Maintenance
Lubricate the moving parts only if necessary,
with a light application of a silicone based
lubricant. Always dry the metal parts to pre-
vent the formation of rust. Do not submerge
the carrycot in water. Routinely wipe clean
plastic parts with a soft damp cloth. To avoid
friction, ensure that the locking devices of the
carrycot and pram are free from dust or sand.
Do not leave the product exposed to the sun
for a long period of time; it may cause the fa-
bric to fade.
CHARACTERISTICS OF THE CARRYCOT
CANOPY
The carrycot has a sun canopy and a wind-
shield that can be adjusted to different posi-
tions.
HOW TO ASSEMBLE AND DISASSEMBLE
THE SUN CANOPY
1 – Check that the clip on the end of the metal Check that the clip on the end of the metal
arch is hooked to the buttons on the fabric
part. If the buttons are secured correctly,
the two ends of the metal arch are clearly
visible (fig 1).
 – Insert the two metal ends into the ap-
propriate supports B and C, located in the
central part of the carrycot, until a click is
heard, indicating that they are locked cor-
rectly into position (diagram  A); then fix
the 4 pins of the rear arch (diagram  B).
NB:The connection system is set inside plastic
supports B and C, the round button on the
support only serves to hook on the hood (see
point 3).
3 – To remove the canopy, first extract the 4
pins of the rear arch (diagram 3A), then
release the front arch, pressing the two
buttons located on the base of the locking
device (diagram 3B).
WARNING: The incorrect unlocking of the
canopy may cause the breaking of the pins.
SUN VISOR
4 – The canopy has an exclusive sun visor.
When not in use, the sun visor can be
folded inside the canopy (diagram 4).
Inside the hood, between the visor and
the first section, there is a fabric ring from
which you can hang soft toys, with conve-
nient hooks (figure 4 a).
WARNING – use only Chicco toys with the fol-
lowing code numbers: 71530, 7138, 7139,
71330.
REAR OPENING
5 – To ensure maximum ventilation, the can-
opy has an adjustable rear opening. To
adjust the opening, open the zip (diagram
5A) and fold the fabric panel onto the up-
per part of the canopy (diagram 5 B).
ADJUSTABLE BACKREST -
COMFORT SYSTEM
6 – The backrest of the carrycot can be ad-
justed gradually. To raise or lower the
backrest, operate the external rear wheel
of the carrycot, located near the end of
the carrycot (diagram 6).
WARNING: It is recommended to ventilate
the carrycot after prolonged use.
CARRY HANDLE
7 - The carrycot has a practical carry handle
that can be adjusted to three positions
(diag. 7):
A) Carrying position
B) Intermediate position
C) Rest position
8 – To position the handle vertically, hold it in
a central position and pull it in an upward
direction, until a clack is heard, indicating
that it is correctly locked into position
(diagram 8a). To replace the handle in
the rest position, press the two buttons
located on the base of the handle at the
same time, and then turn it in a downward
direction (diagram 8b).
WARNING: The carrycot cannot be carried
with the handle placed in the intermediate or
rest positions, but only with the handle in the
carrying position.
CLEANING
The canopy, the internal lining of the carry-
cot and the mattress can be removed and for
16