SOUNDMASTER PL525 Manual De Instrucciones página 19

ENCODING FROM PHONO/RADIO OR AUX IN INTO MP3 FILE
The system is able to encode the Phono/Radio or Aux in to MP3 format and recording at
memory media with USB connecting port.
A) Phono encoding
1) Turn "Function" button (4) to select " Phono " mode and then press the " Record
(6) directly.
2) The LCD display (7) with show the word " USB " and "
starting the encoding mode.
3) Start playback at Phono for the track which you want to record.
4) To stop the recording, press the " Record
" Phono " mode.
B) Radio encoding
1) Turn "Function" button (4) to select " Turner " mode and tune to the desired radio station by
" manual" or " auto " tuning method, and then press the " Record
2) The LCD display (7) with show the word " USB " and "
starting the encoding mode.
3) To stop the recording, press the "Record
to " Tuner " mode.
Remark:-
- The recording speed is 1:1 and according to the actual plying time.
The system will create a "audio " folder and then store the encoding track in it.
-
The recording format is default at – MP3 bit rate : 128 kbps, sampling rate : 44.1kHz
-
- No song title will be recorded during encoding mode
To interrupt the recording, press the "Record " button (6) again during record mode.
-
C) Track separation (by remote handset)
You can divide the recording music from phono or tape to USB track by trace during encoding.
Every time when press the"
encoding from tape/phono to USB, the system will generate a new track and continuous the
recording. The current text at LCD display will show 'TS' one time, it mean the unit is creating a
new track successfully but track separation feature was not available at Tuner mode.
D) Encoding bit rate (by remote handset)
You can select the desired bit rate during encoding from phono to USB, the selectable range
from 32 / 64 /96 /128 / 192 / 256 kbps.
1) Select Phono mode & remain stop mode.
2) Press the " INFO/DELETE" button (12) on remote handset and the LCD display (7) will show
the default bit rate (128 kbps)
3) Press Folder ▲ or ▼ button (4) on remote control to select the desired bit rate for encoding.
4) Press again the " INFO/DELETE" button (12) to confirm the setting and the LCD display (7)
resume to Phono mode
" button (6) the LCD stop flashing and return to
" button (6) the LCD (7) stop flashing and return
" (track separation) button (7) once at remote handset during
7
PL525 / English Instruction Manual
" & flashing, now the system is
" button (6) directly.
" & flashing, now the system is
" button