More Features; Active/De-Active Timer Function - SOUNDMASTER PL525 Manual De Instrucciones

FILE DELETE AT USB (BY REMOTE CONTROL)
The system is able to erase the file stored inside the USB pen drive by following:-
All files delete
1. Set USB on stop mode, press and hold the "INFO/DELETE " button (12) for 3 seconds and
the LCD display (7) will show (DEL ALLN)
2. Press skip or skip
3. Press the "INFO/DELETE" (12) button again to confirm the setting.
Remark : All the files inside the MP3 track USB storage media will be deleted completely after
confirming to " yes " mode.
Removing of USB
To remove the USB, turn off the power or switch the function mode to either tuner or phono first.
For USB port – un-plug it by pulling out the USB socket directly.
A. Sleep setting (by remote control)
1. Press "SLEEP/TIMER" (14) button and sleep indicator shown on the LCD (7).
2. Keep pressing the "SLEEP/TIMER" button (14) to adjust the sleep timer in the order of 90 >
80 >70....10 minutes.
3. System will stop and go to standby mode automatically after the selected timing.
4. To cancel the sleep mode, press "SLEEP/TIMER" button (14) unit it reach "Off" mode.
Remark:-
If press the sleep button once and the " Sleep " indicator appear on the LCD (7), the system will
go to standby mode automatically after selected minutes.
B. Alarm clock setting (by remote control)
This function allows the system to turn on automatically and wake you up by soft music or radio.
First, set the unit at standby mode then press and hold the "SLEEP/TIMER" button (14) to enter
the timer program mode until the " On time " is flashing on LCD display, then you can start the
alarm setting:
1) On time setting : Press the "SLEEP/TIMER" button again (hour digit will flash) and "Skip"
button to set the hour. Then press again "SLEEP/TIMER" to enter the minute,
or
then press "SLEEP/TIMER" and "Skip"
"SLEEP/TIMER" button enter the wake up setting mode
2) Wake up mode : Press " FUNC " button(1) to set the wake up mode (USB / Tuner). Then
press " SLEEP/TIMER" button to enter the volume mode.
3) Volume level : Press and "Skip"
"SLEEP/TIMER" button again to enter the off time mode setting.
4) Off time setting : Press the "SLEEP/TIMER " button and then press "Skip"
to set the off time. Then press " SEEP/TIMER " button again to complete the setting.
 Active/de-active timer function
1. To cancel alarm function by press again "SLEEP/TIMER" button until the timer indicator "
" disappear.
2. To re-active the timer function, repeat the alarm clock setting procedure.
(5/10) button to select " Yes " or " No ".

MORE FEATURES

or button to set the volume level, then press
or button to set the minute, press
8
PL525 / English Instruction Manual
or button