Route Of Pipeline; Drain Pipe Connection - mabe MMI12CABWCAAXM8 Manual Del Propietário

route of pipeline

1.
Depending on the position of the unit, the piping may be routed
sideway from the left or the right ( Fig 1 ), or vertically from the back
( Fig 2 )(depending on the pipe length of the indoor unit). In the case
side.
Connecting Pipe
Drain Hose
and Cables
Outlet material preparation
Fig 1

drain pipe connection

1. Remove the mountings and pull the indoor unit pipe out of the
housing.
2. Connect the connecting pipe to the indoor unit:
wrench, and the direction is shown in diagram on the right. The
torque used is shown in the following table.
tightening torque table
the size of pipe(mm)
Φ9/Φ 9.52
Indoor unit pipe
Spanner
Connecting Pipe
Drain Hose
and Cables
Fig 2
torque(N·m)
15~25
25~40
45~60
73~78
75~80
Taper nut
connecting pipe
Torque wrench
61