How To Clean And Care For Your O² Patch; Cleaning; Changing The Patch - IBP O2 Patch Manual De Instrucciones

Lower the stimulation intensity or turn
off the O² Patch if the effect should
become unpleasant.
5. How to turn off the O² Patch: Press the
OFF– button repeatedly until the illumi-
nated displays turns off.
Remove the electrode patch from the
skin only in off-mode.
6. Remove the O² Patch from the skin: Slide
a finger underneath the electrode patch
and lift up the electrode patch.
7. Moisten the back of the electrode patch
with a drop of water each on the left and
right sides to protect the electrode patch
from drying out.
8. Apply the O² Patch to a different stimula-
tion point
or
9. Terminate the application:
● Apply the protective foil to the elec-
trode patch.
● Place the O² Patch inside the protec-
tive cover.
● Store the O² Patch out of the reach of
children and protected from sunlight
and moisture until the next application.
38
7. How to clean and
care for your O² Patch

7.1 Cleaning

1. Turn off the O² Patch.
2. Clean the housing with a damp cloth.
► Do not clean the housing with
caustic or abrasive cleansers.
► Do not sterilize the electrode patch
or the device itself in a steam steri-
lizer or in a cold sterilizing bath.

7.2 Changing the patch

Replace the electrode patch when it is
dirty or worn.
1. Turn off the O² Patch.
2. Remove the electrode patch from the
O² Patch.
3. Place the new electrode patch on the
O² Patch.
39