Hart HTBG01 Manual Del Operador página 4

SPECIFIC SAFETY RULES
 Always ease the workpiece against the abrasive
wheel when starting to grind. A harsh impact can break
the wheel. Use light pressure when starting to grind; too
much pressure on a cold wheel can cause the wheel to
crack.
 Risk of injury due to accidental starting. Do not use in
an area where children may be present.
 Never start the grinder when the wheel is in contact with
the workpiece.
 Secure work. Always hold workpiece firmly against the
work rest.
 Do not use the bench grinder if the flange nut or clamp
nut is missing or if the spindle shaft is bent.
 Frequently clean grinding dust from beneath grinder.
 Secure long hair so it is above shoulder level to prevent
entanglement in any rotating parts.
 Stay alert and exercise control. Watch what you are
doing and use common sense. Do not operate tool when
you are tired. Do not rush.
 Do not touch the cut material until it cools or you can be
burned.
 If the power supply cord is damaged, it must be
replaced only by the manufacturer or by an authorized
service center to avoid risk.
 Make sure the grinder is securely mounted as
described in the assembly instructions before connecting
the tool to a power supply.
 Save these instructions. Refer to them frequently and
use to instruct other users. If you loan someone this tool,
loan them these instructions also.
4 – English